Kbase 9167: Nixdorf Version 6.2G.05 Installation/Release Notes (cmb)
| Autor |
Progress Software Corporation - Progress |
| Acesso |
Público |
| Publicação |
10/05/1998 |
|
Nixdorf Version 6.2G.05 Installation/Release Notes (cmb)
910828-cmb01
ADDITIONAL NOTES FOR THIS RELEASE
PLATFORM: Nixdorf TARGON 31
MEDIA TYPE: Cartridge Tape
SOFTWARE RELEASE: 6.2G05
EXTRACT COMMAND: cpio -iuvcdBm < /dev/rst0
INSTALL COMMAND: ./proinstall
MACHINE NOTES:
OPERATING SYSTEM NOTES:
TERMINAL NOTES:
SOFTWARE NOTES:
o Online Backups
--------------
The use of the -o (overlap factor) is not supported in this
release; you must restore the incremental backups exactly the
same way as you did when you backed them up or you will have
problems. For example,
proshut demo -C online /dev/rst8
proshut demo -C online /dev/rst8 incremental -o 2
After restoring the full backup, if you skip any of the
incrementals, you receive an error message indicating that
the tapes are out of sequence and the restore fails.
Workaround: Make sure all backups are restored in exact order.
o Probkup Utility
---------------
If you do not use the blocking factor option (-bf) while
executing probkup, you will receive the error:
kernel(1067)_dbutil: byte count exceeds raw 10 area size(32768)!
Progres:_dbutil error writing block 259 on /dev//rst0 error 14.
o Fast Track (convft)
-------------------
If you use the convft utility to convert your database to a
Fast Track database, you must set the PROEXE environment
variable first:
PROEXE=/usr/dlc/_progres;export PROEXE
convft database-name
o Fast Track (500 file limit)
---------------------------
Unlike earlier versions, Fast Track Version 6.2G.05 enables you
to choose from more than 500 files when creating QBF's,
reports or forms. Now there is no limit to the number of
files you can select. However, because of internal changes to
the Fast Track code, you must recompile any QBF's or menus
generated with earlier versions of Fast Track to run them
under Version 6.2G.05.
o Index Deactivation
------------------
If you are deactivating indexes, do it through the Index
Editor. Deactivating indexes through the Admin menu in
the Dictionary will deactivate the top index.
For example: In the customer file there are three indexes,
Cust-num, State, and Zip. If you choose to deactivate Zip, it
deactivates Cust-num as well as Zip.
o ORACLE ldemo
------------
The ldemo script that resides in subdirectory ora in
the directory where you install PROGRESS
(e.g., /usr/dlc/ora/ldemo) will not work with the
Query/Runtime or Runtime product. It makes schema
modifications which these products do not support.
o REMOTE RMS GATEWAY
------------------
If you press the CTRL-BREAK key while running a program with an
active transaction, you are disconnected from the Broker,
but your transactions are NOT backed out! The Broker process
also terminates.
o REMOTE RDB GATEWAY
------------------
If you try to create a local schema holder while connected
remotely to a VMS database, you get the following error:
SYSTEM ERROR: A fatal Rdb gateway error has occured.
Nothing is reported in the log file, but the client session
is terminated.
o REMOTE GATEWAYS
---------------
In PROGRESS Version 6.2G.05, you can remotely access an Oracle or
RMS database. To do this, you must install a Version 6.2G.05
(or later) core PROGRESS product (for example, PADS, 4GL&RDBMS,
Query Report, or Runtime) on the machine where you
are running your PROGRESS application and on the machine
hosting your non-PROGRESS database.
o Progress Version 6.2G.05 does not trap the CTRL-C if you use it with
Remote Oracle Gateway. If you use CTRL-C within a transaction,
you are disconnected from the Remote Oracle server with the
following message on your client:
** Disconnected by the server, code 7 (706).
Also, the Remote Oracle server's log will have the following error
messages:
SERVER: SYSTEM ERROR: oratmstrt: transaction already started (1473)
SERVER: ** Please save file name core for analysis by PSC. (439)
SERVER: logout usernum 0, userid, on (739).
o PROBUILD
--------
o When running PROBUILD, the $PROLOAD/eucapp/euc.pl file must
have at least read and write permissions (rw-rw-rw-), otherwise
you will get the error:
** Cannot find or open euc.pl errno 13
To avoid this error, change the permissions on the euc.pl
file as follows:
chmod 666 $PROLOAD/eucapp/euc.pl
where $PROLOAD is an environment variable set to where
you have the dlcload directory installed - /usr/dlcload
by default.
o You can now use PROBUILD to build an executable with a remote
gateway configurable element. For example, if you need to
access a remote Oracle database, just select your networking
protocols and REMOTE ORACLE GATEWAY at the CONFIGURABLE
ELEMENTS screen.
If you need to access your non-PROGRESS database locally,
you need to purchase the PROGRESS 4GL&RDBMS software and
the Database Gateway software. If you do not have this
combination of products, you cannot load the standard
gateway in your executable. See Chapter 1 in the PROGRESS
3GL Interface Guide for more information.
o Connecting Databases
--------------------
You must use the -Nv 12 startup option to connect a 6.2G.05 client
to a Version 5 or 6.2A-6.2G.05 PROGRESS server.
o Multi-Volume Databases - prostrct add
-------------------------------------
If you define a variable length extent and then use the
"prostrct add" command to add another variable
length extent, the command does not work correctly.
It should convert the previous variable-length to a
fixed-length extent, but it does not.
To workaround this problem, do not use the "prostrct add" command.
Instead, create a new structure file (.st). Define all of the
extents you want, including any new extents. Create a new void
multi-volume database and use the "procopy" command
(or the "probkup" and "prorest" commands)
to copy the old database to the new one.
Progress Software Technical Support Note # 9167