Kbase 34336: Error 8619 code 1, many DB brokers
| Autor |
Progress Software Corporation - Progress |
| Acesso |
Público |
| Publicação |
5/10/1998 |
|
Solution ID: P4336
SYMPTOM(s):
** This process terminated with exit code <1>. (8619)
Many database servers running
Port numbers used for the DB brokers are "close" to each other,
CAUSE:
The problem can be due to "Port defined for the broker is already in use".
FIX:
Be sure you set the "Maximum dynamic port" and "Minimum dynamic port" Ports" within the ServerGroup Configuration in Progress Explorer, or use the corresponding startup parameters -minport and -maxport, so that the DB Broker ports are not conflicting with the ports dynamically allocated for communication between a server and its clients.
Minport and Maxport parameters are valid only for the Remote Servers (_mprosrv processes). If you are running the Admin Server, then there is a port used for the communication between the admin sever and each database broker.
Should you have secondary brokers and/or OIB plus OID (for Open Interface Broker and Driver), then you would have additional ports used.
On the site http://www.foundstone.com/knowledge/intrusion_detection.html
the tool FPORT should allow the identification of the processes bound to a port.